Geelong Decking

How Much Does a Deck Cost in Geelong? (2026 Price Guide)

Installed prices for timber and composite decking, with example budgets for your Geelong, Bellarine or Surf Coast home.

(03) 5292 1425

These are average installed price ranges — supply and installation, including the subframe, GST inclusive — based on current 2026 pricing published across Australian and Victorian cost guides. They are a budgeting guide, not a quoted price for your property. Prices fluctuate with timber supply, site access, height and design, so an exact fixed quote is given after a free site visit.

Deck prices per m² in Geelong

Use the ground-level ranges below for a straightforward deck. The final scope may also include stairs, balustrades, demolition, engineering and permits; these are assessed and itemised in your quote.

2026 installed decking prices, including subframe and GST
Material or allowanceInstalled price per m²
Treated pine (ground level)$200 – $350
Merbau hardwood$320 – $550
Spotted gum / blackbutt hardwood$400 – $620
Composite (standard)$350 – $580
Premium capped composite (e.g. Trex-class)$450 – $900
Elevated deck (over 1m high)Add roughly 30–60%
Ongoing timber maintenance (sand + oil)Approx. $25 – $60 per m² per visit

Example deck budgets by size

These examples multiply the installed ground-level rates by the deck area. They exclude the elevated-deck loading and any project-specific extras. Composite below means standard composite, not premium capped boards.

Ground-level installed deck budgets for 15, 20, 30 and 40 square metres
Deck sizeTreated pineMerbauSpotted gum / blackbuttComposite
15 m²$3,000 – $5,250$4,800 – $8,250$6,000 – $9,300$5,250 – $8,700
20 m²$4,000 – $7,000$6,400 – $11,000$8,000 – $12,400$7,000 – $11,600
30 m²$6,000 – $10,500$9,600 – $16,500$12,000 – $18,600$10,500 – $17,400
40 m²$8,000 – $14,000$12,800 – $22,000$16,000 – $24,800$14,000 – $23,200

Deck cost calculator

Measure your deck

Estimated installed cost · 20 m²

$6,400 – $11,000

This is an estimate only. Prices fluctuate, so for an exact price we'll quote after a free on-site visit.

What affects deck cost in Geelong?

  • Material: timber species, board widths, finish and composite product grade change both the upfront price and ongoing care.
  • Size and layout: larger decks need more boards, footings and subframe. Curves, angled cuts and multiple levels add labour and waste.
  • Height and stairs: a deck over 1m generally needs more substantial structural work. Stairs, landings and safe access add cost.
  • Site slope and access: sloping land, restricted access and difficult ground conditions can increase excavation, footing and labour costs.
  • Balustrades: the required height, length and material — such as timber, metal or glass — affect the budget.
  • Coastal salt exposure: in Torquay, Ocean Grove, Barwon Heads and the Bellarine, suitable fixings and corrosion-resistant connections matter. Exposure also influences timber care and material selection.
  • Bushfire requirements: Surf Coast properties in designated Bushfire Prone Areas need a BAL assessment. The rating may limit decking materials and require specific construction details.
  • Permits and design: planning approvals, building permits, surveyor fees and engineering requirements depend on your property and proposal.

Do I need a permit? Our guide explains building permits, planning controls and BAL requirements across Geelong, the Surf Coast and Bellarine.

Timber or composite: lifespan, maintenance and look

Service life varies with product quality, drainage, ventilation, installation and care. The following lifespans are approximate expectations, not guaranteed outcomes.

Treated pine

A budget-friendly timber with a simple, natural look that can be stained to suit your home. Treated pine lasts about 15–20 years with appropriate installation and regular maintenance. Keep it clean and renew the protective finish as needed.

Hardwood: merbau, spotted gum and blackbutt

Hardwood provides rich grain and natural variation. Merbau has a deeper reddish-brown appearance; spotted gum and blackbutt offer Australian timber character. Hardwood lasts about 25–40+ years with good construction and care, and needs periodic sanding and oiling to maintain its finish. See our timber decking options.

Composite

Composite offers a consistent finish and a range of timber-look colours without regular sanding or oiling. Allow about 25–30 years, depending on the product and conditions. Regular cleaning and the manufacturer's installation requirements still matter. Premium capped products usually cost more upfront. Explore composite decking in Geelong.

Deck cost questions

How much does a 20m² deck cost in Geelong?

For a ground-level deck, allow $4,000–$7,000 for treated pine, $6,400–$11,000 for merbau, $8,000–$12,400 for spotted gum or blackbutt, or $7,000–$11,600 for standard composite. These are indicative installed ranges, not a fixed quote.

Do these deck prices include installation and GST?

Yes. The material ranges allow for supply and installation, including the subframe and GST. Stairs, balustrades, demolition, permits and difficult site conditions can add to the price and are confirmed in your written quote.

How much more does an elevated deck cost?

For a deck over 1 metre high, allow roughly 30–60% more than the ground-level material range. Footings, structural design, access, stairs and balustrades affect the final price.

Is composite decking cheaper than hardwood?

Not always. Standard composite is approximately $350–$580 per m² installed, compared with $320–$550 for merbau and $400–$620 for spotted gum or blackbutt. Composite avoids regular oiling, but premium capped boards can cost more upfront.

What should I budget for timber deck maintenance?

Professional sanding and oiling is approximately $25–$60 per m² per maintenance visit. Frequency depends on exposure, timber condition and the coating manufacturer's advice. Cleaning, repairs and replacement boards may cost extra.

Can I get an exact deck price before booking?

Yes. We offer a free on-site visit to measure your space and assess materials, access, height and permit requirements, then give you an exact fixed quote for the agreed scope. Published ranges are estimates only.

Before finalising your budget, read our Geelong deck permit guide so approvals and site requirements are considered from the start.

Get a free decking quote

Tell us about your deck in Geelong, the Bellarine or Surf Coast. We'll arrange a free site visit and a fixed quote for your project.

(03) 5292 1425
Free quoteStep 1 of 6
What do you need?
Call Now